Advertisement
Model：R711A
Wireless Temperature Sensor
Wireless Temperature Sensor
R711A
User Manual
Copyright© Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall be
maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written
permission of NETVOX Technology. The specifications are subject to change without prior notice.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for netvox R711A
Summary of Contents for netvox R711A
- Page 1 Copyright© Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written...
-
Page 2: Table Of Contents
Table of Content 1. Introduction ..................................2 2. Appearance ..................................2 3. Main Features ..................................2 4. Set up Instruction ................................3 5. Data Report ..................................4 7. Installation ..................................7 8. Important Maintenance Instruction ........................... 8... -
Page 3: Introduction
1. Introduction R711A is a long distance wireless temperature sensor based on LoRaWAN protocol (Class A). It is compatible with LoRaWAN protocol. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. -
Page 4: Set Up Instruction
4. Set up Instruction On/Off Insert batteries. (Open the battery back cover and insert two 1.5V AA batteries into the Power on battery slot) Turn on Press and hold the function key till the green indicator flashes once. Turn off (Restore to factory setting) Press and hold the function key for 5 seconds and the green indicator flashes 20 times. Power off Remove batteries 1. -
Page 5: Data Report
1. The cycle of the device sending the data report is according to the default. 2. The interval between two reports must be MinTime. Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index to resolve uplink data. - Page 6 ReportReq (2bytes Unit: s) (2bytes Unit: s) (1byte Unit:0.1v) (2byte 0x00) Unit:0.01℃) Config Status Reserved 0x81 ReportRsp (0x00_success) (8Bytes, Fixed 0x00) R711A 0xBC ReadConfig 0x02 Reserved (9Bytes, Fixed 0x00) ReportReq Temperature BatteryChange Reserved ReadConfig MinTime MaxTime Change 0x82 (1byte Unit:...
- Page 7 Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange value. Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V. MaxTime Sleeping (MinTime) sleeping sleeping sleeping Wakes up and Wakes up and Wakes up and Wakes up and Wakes up and...
-
Page 8: Installation
This product does not have a waterproof function. After the join into LoRa network, please place it indoors. 1. Please screw the bracket into the wall. Temperature and Humidity Sensor (R711A) is suitable for the following scenarios: ⚫ Family ⚫ School ⚫... -
Page 9: Important Maintenance Instruction
8. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can corrode electronic circuits. In case the device is wet, please dry it completely.
Need help?
Do you have a question about the R711A and is the answer not in the manual?
Questions and answers