Transtector ALPU HT Installation Instructions

WARNING

1. Important safety instructions. Read and understand all instructions before installing this

product. Save these instructions for future reference.

2. The suppressor will interrupt communications in the event of self-sacrifice.

3. Installation shall be performed by qualified electrical technician only.

Thank you for your recent purchase of our surge protection solution. Your satisfaction with our

product and service is important to us. If you have any questions, comments or concerns, please

to serve your protection needs.

+1.208.772.8515 | www.transtector.com

ALPU HT

HT-NO-ALPU-GBEP

INSTALLATION INSTRUCTIONS

HT-ALPU-GBEP-M Rev A

+1.208.772.8515 | www.transtector.com

Table of Contents

Need help?

Do you have a question about the ALPU HT and is the answer not in the manual?

Page 1 Thank you for your recent purchase of our surge protection solution. Your satisfaction with our product and service is important to us. If you have any questions, comments or concerns, please contact us at 800.882.9110 or visit our website at transtector.com. We look forward to continuing to serve your protection needs.
Page 2 Each module should be scheduled for periodic inspection to ensure the module is operational and all wire connections are tight. Disconnect power prior to inspection and maintenance. If the module is damaged, contact Transtector for replacement. AVAILABLE ACCESSORIES A pole mount adapter kit (pn 1000-1164) is available to meet installations on a wide range of pole diameters from 2”...

Ht-no-alpu-gbep