Advertisement
INSTALLATION
3
2
1
4
5
6
7
8
INSTALLATION CHECKOUT
9
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
1284744-AN2-A
Install the washer(2) into the bottom of faucet(3).
Insert hoses(4) and stud(1) into the hole of the sink.
From underside of the sink, fit the bracket(5) onto
the stud. Position the faucet. Install the washer(6)
and nut(7) onto the stud, tighten the nut by tool(8) to
secure the faucet.
Attach the hoses to water supplies, the hose with
blue dot connects to cold water.
Ensure that all coupling nuts are tight. Ensure that
the lever handle is in the off position.
Turn on the main water supply and drain, and check
for leaks. Repair as needed.
Remove the aerator kit(9) by hand. Run hot and cold
water through faucet for about one minute to remove
any debris. Check for leaks. Repair as needed.
Remove any debris from the aerator. Shut off the
faucet. Reinstall the aerator.
SERVICE PARTS
72762T-9MND
1243889
38820
1192902**
1271187
1271397
52202
78150
**Color code must be specified when ordering.
2
1284744-AN2-A
ARTIFACTS
Single-handle Bathroom Sink Faucet
1233282
1181649**
38676
1272333**
1176148
1228834
1244853**
1194613
1192910**
3
Advertisement
