Advertisement
WARNING! When assembling and using stand, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment. Read all
instructions before setup and use!
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. OBSERVE WORK AREA CONDITIONS. Do not use in damp or wet locations. Don't
expose to rain. Keep work area well lighted. Do not use electrically powered tools in the
presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords. Never allow children to play with or
climb on the Roller Stand.
4. STORE IDLE EQUIPMENT. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE TOOL. It will do the job better and more safely at the rate for which it
was intended. Do not use a modified Folding Roller Stand to perform a task for which it
was not designed.
6. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain applications for
which this tool was designed. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
7. DRESS PROPERLY. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
8. USE EYE AND EAR PROTECTION. Always wear ANSI-approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear
an ANSI-approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists.
9. DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over
or across running machines.
10. DO NOT USE FOLDING ROLLER STAND TO SUPPORT PEOPLE OR ANIMALS.
11. STAY ALERT. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
12. CHECK FOR DAMAGED PARTS. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Any part that is damaged should be properly repaired or
replaced by a qualified technician.
13. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty.
14. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS.
Read warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
15. MAINTENANCE. For your safety, periodically check hardware for tightness.
16. ONLY USE THE ROLLER STAND ON A FLAT AND LEVEL SURFACE CAPABLE OF
SUPPORTING THE WEIGHT OF THE STAND AND THE WEIGHT THE WORKPIECE.
SAFETY WARNINGS
AND PRECAUTIONS
Advertisement
