Related Manuals for Naxa NHS-5002
Summary of Contents for Naxa NHS-5002
- Page 1 42 INCH TV SOUND BAR WITH AMAZON ALEXA MODEL:NHS-5002 PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE...
-
Page 2: Fcc Statement
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 3: Fcc Notice
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 4 washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6. Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 5 moisture, does not operate normally, or has been dropped. 15. Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
- Page 6 20. Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts.
-
Page 7: Product Overview
PROdUCT OvERvIEW TOP VIEW STANDBY MODE VOL- VOL+ 1.STANDBY/MODE Button /VOL+ Button /WPS Button (Microphone On/Off) Button /VOL- Button (Communication) Button REAR VIEW FRONT VIEW AUX IN 2 FM ANT AUX IN 1 16V,3A OPICAL IN 11 12 11. FM Antenna 7. -
Page 8: Remote Control
REMOTE CONTROL MODE TUNE- TUNE+ NHS-5002 (Mute)Button Power Button 7. MODE Button (Previous)/ TUNE- Button (Next)/TUNE+ Button VOL - (Volume down) Button (Play/pause) Button (Microphone On/Off) Button VOL + (Volume up) Button (Communication) Button 11. WPS Button... -
Page 9: Battery Installation Of Remote Control
BATTERY INSTALLATION OF REMOTE CONTROL FIRST TIME USE ●Remove and discard the insulation film as shown on the Figure to the right. ●Replacing Batteries on the Remote Control: 1. Push and slide out the battery holder as shown in Figure 1 below. 2. -
Page 10: Placement And Mounting
PLACEMENT AND MOUNTING 1. Placing the device on a table - Ventilation When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. - Page 11 Mounting to a wall 2.1 Mounting to a wooden wall (screws not included) A. Mark the position of the mounting screws on the wall using a pencil. B. Drill the screws directly into the marks that you have made on the wall and leave approx.
-
Page 12: General Operation
GENERAL OPERATION 1. Connect the AC/DC adapter to the unit and wall outlet. "WAIT" will appear on the display. 2. Press and hold the STANDBY/MODE button on the unit or press the Button on remote control to turn on the unit. Press the STANDBY/MODE button on the unit or press the MODE button on the remote control repeatedly to turn to desired mode as shown below: WIFI....................WIFI Mode... - Page 13 -- the speaker is now ready for connection. WIFI To DC IN Jack 3. Tap the NAXA RESOUND icon on your iOS or Android 2. Turn on the WiFi on your Android device device. It will start to scan and search for available speakers automatically.
- Page 14 NHS-5002. 4. Read the instructions on the screen and tap to continue. Next Please select your device Make sure your phone is connected to 2.4G Wi-Fi, not 5G. NAS-5000 YOUR WIRELESS-2.4G YOUR WIRELESS-5G NAS-5001 Not sure what you're currently using? Refer to your router's user guide for more info.
-
Page 15: Name Device
9. When the speaker is successfully connected 8. There will be voice instructions to the Wi-Fi, the Mode Indicator on top during the connection process. of the speaker will stay and "WIFI" will WHITE remain on the display. If connection fails, please try again and <... - Page 16 Before using Amazon LinkPlay Alexa voice control function, you must have an Amazon account. Create an account on Amazon's website. If you already have an account please sign in. NHS-5002_XXX Your device includes access to Alexa. Connect your Amazon account to access personalized features.
-
Page 17: Device List
13. Next, the DEVICE LIST will appear as shown below: Tap " " to add more speakers to the < DEVICE LIST network. Repeat the procedures above to make connection and follow the on- screen instructions. NHS-5002_XXX No song Tap "... -
Page 18: Home Screen Interface
HOME SCREEN INTERFACE "NAXA" to enter the home screen, Navigate as shown below and follow the on- screen instructions. Some platforms may require registration. for online Touch to search Search songs, artists, & albums Touch to listen to your Favorites... -
Page 19: Iheartradio Operation
iHEARTRADIO OPERATION Before starting, you must create an iHeartradio account to log on. 1. Tap "iHeartradio" on the RESOUND home screen. 2. Input your account information to log on. 3. Select the desired song to play. SPOTIFY OPERATION Before starting, you must create a Spotify Premium account log on. 1. - Page 20 AMAZON LINKPLAY ALEXA VOICE CONTROL Before using Amazon LinkPlay Alexa voice control function, you must create an Amazon account. Create an account on the Amazon website. (www.amazon.com) Amazon on the home screen. A login window will appear; enter your account 1.
-
Page 21: Speaker Status
COMMUNICATION INDICATOR STATUS communication status indicator FRONT VIEW OF THE UNIT LED STATUS SPEAKER STATUS LED ON Idle White Listening Blue LED ON Thinking Blue LED ON Blue LED blinks Talking Microphone Off Red LED ON... -
Page 22: Bluetooth Operation
The pairing name is " ". NOTE: NAXA NHS-5002 5. After pairing successfully, "BT" will stay on the display and should hear a confirmation tone. 6. If pairing is unsuccessful, turn off the speaker first and then follow the above steps to re-pair. -
Page 23: Radio Operation
RAdIO OPERATION Before using your unit for FM reception, unwrap and fully extend the antenna wire. You may need to adjust the position of the antenna wire for maximum signal strength. 1. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wall outlet, press and hold the STANDBY/MODE button to power on the unit, wait until "WIFI"... - Page 24 AUX IN 1 OPERATION 1. Connect the external audio device to the unit by an audio connection cable with 3.5mm stereo mini jacks: ~ Insert one end to the mobile phone/external audio device; Line Out or AUX Out jack ~ Insert the other end to the AUX IN jack on the rear of the main unit. AUX IN 1 Mobile Phone (Audio Connection Cable supplied)
- Page 25 AUX IN 2 OPERATION An external Audio/Video player(such as a TV, DVD Player, VCR etc.) can be connected to this unit and project audio through the speakers. 1. Plug one end of RCA White and Red cable into the LINE IN jacks on the rear of the unit. Plug the other end of RCA White and Red cable into audio out jacks of TV or external A/V device as the illustration shows below.
- Page 26 OPTICAL-IN OPERATION 1. Connect the Optical out jack from the external audio Player (like a TV, DVD Player BD Player, etc.) to the OPTICAL IN jack on the top of unit by the Optical Connection Cable (not supplied) shown in the figure below: ( F or PCM format only ) OPICAL IN Optical Connection Cable ( not supplied ) TV DVD player BD player etc.
-
Page 27: Troubleshooting
TROUBLESHOOTING Please check the following list of common problems before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Volume level of paired/connected device Raise the volume level of the No sound or sound weak is in low level paired/connected device Volume level of the connected/paired Reduce the volume level of the Sound distortion...
Need help?
Do you have a question about the NHS-5002 and is the answer not in the manual?
Questions and answers