Advertisement
Quick Links
Naxa NHS-5002 Quick Start Guide
GENERAL OPERATION
1. Connect the AC/DC adapter to the unit and wall outler. "Wait"
will appear on the display.
2. Press and hold the STANDBY/MODE button on the unit, or
press the Power Button on the remote control, to turn the unit on.
Press the STANDBY/MODE button on the unit, or repeatedly
press the MODE Button on the remote control, to turn to the
desired mode. The modes are as follows:
WIFI.............................WIFI Mode
BT.................................Bluetooth Mode
RADIO..........................FM Radio Mode
AUX 1...........................AUX IN 1 Mode
AUX 2...........................AUX IN 2 Mode
OPT..............................OPTICAL IN Mode
NOTE: Amazon Alexa will only operate while the device is in
WIFI Mode. External streaming through the device can be
done via the Amazon Alexa app while in WIFI Mode.
3. During Playback:
- Press and hold the VOL- or VOL+ button on the unit, or press
the VOL- or VOL+ button on the remote, to adjust the volume.
- Press the Mute button on the remote to turn the audio off. Press
again to resume audio.
4. When finished listening, press and hold the STANDBY/MODE
button on the unit, or press the power button on the remote
control, to put the unit into standby mode.
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
No sound or
Volume level of paired/connected device
sound weak
is in low level
Volume level of the connected/paired
Sound
device is to high
distortion
BT not
The external BT device had NOT paired to
the unit
functioning
The external BT device is to far from the
unit
POSSIBLE SOLUTION
Raise the volume level of the
paired/connected device
Reduce the volume level of the
connected/paired device
Pair the external BT device to the
unit
Place the external BT device
closer to the unit
PRODUCT OVERVIEW
What's in the Box:
1. Main unit with antenna
2. Power adapter
3. Remote control
4. 3.5mm auxiliary cable (for AUX 1 use)
5. Red and white RCA cable (for AUX 2 use)
NOTE: Optical connection cable not provided.
1
Advertisement
Related Manuals for Naxa NHS-5002
Summary of Contents for Naxa NHS-5002
-
Page 1: General Operation
Naxa NHS-5002 Quick Start Guide PRODUCT OVERVIEW GENERAL OPERATION 1. Connect the AC/DC adapter to the unit and wall outler. “Wait” will appear on the display. 2. Press and hold the STANDBY/MODE button on the unit, or press the Power Button on the remote control, to turn the unit on. -
Page 2: Remote Control
REMOTE CONTROL HOME SCREEN INTERFACE Tap “NAXA” to enter the home screen. Navigate as shown below and follow the on-screen instructions. Some platforms may require registration for use. WIFI SETUP COMMUNICATION INDICATOR STATUS BATTERY INSTALLATION FOR REMOTE Remove and discard the insulation lm, as shown in the Figure to the right. - Page 3 2. Turn on the WIFI on your iOS or Android device. Connect your iOS or Android device to the desired WiFi network. 3. Tap the NAXA RESOUND icon on your iOS or Android device. It Play All will automatically start to scan and search for available speakers.
-
Page 4: Radio Operation
Bluetooth devices. Plug the adapter into the wall outlet. Press and hold the STAND- NOTE: the pairing name is “NAXA NHS-5002”. BY/MODE button to power on the unit. Wait until “WIFI” appears on the display. - Page 5 AUX IN 2 OPERATION (Good) 2. Plug one end of the adapter into the DC-IN jack of the speaker. Plug the adapter into the wall outlet. Press and hold the STAND- BY/MODE button to power on the unit. Wait until “WIFI” appears You can connect an external Audio/Video player (such as a TV, on the display.