CITROEN C1 2015 Handbook page 157

Replacing a fuse
Before changing a fuse, it is necessary to:
F immobilise the vehicle and switch off the
ignition,
F switch off all electrical consumers,
F identify the failed fuse using the fuse
allocation tables and diagrams in the
following pages,
F identify and correct the cause of the
problem.
When replacing a fuse, you must always:
F use the special tweezer to extract the fuse
from its holder and check the condition of
its element,
F replace a failed fuse by on of the same
rating (same colour); the use of a different
rating fuse could cause a fault (risk of fire).
If the problem recurs after replacing the fuse,
have the vehicle's electrical system checked by
CITROËN dealer or a qualified workshop.
Good Failed
Tweezer
Practical information
Installation of electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer or a
qualified workshop.
CITROËN will not accept any
responsibility for the costs incurred
in repairing your vehicle or for the
malfunctions resulting from the
installation of auxiliary accessories which
were not supplied or recommended by
CITROËN and which were not installed
in accordance with its instructions, in
particular where the current consumption
of all the the additional equipment
connected exceeds 10 milliamps.
9
155