Intended Purpose; Technical Data - Bifinett KH 1101 Operating And Safety Instructions Manual

Bifinett KH 1101

1. Intended Purpose

This kettle is intended for home use of
heating water. It is not intended for use with
other liquids or commercial or
industrial use.
Important Information for Your Safety
Please observe the following instructions
to avoid the hazard of electrical shock:
• Please ensure that the base and its
lectrical connections never get in contact
with water. If the base should unintentio-
nally get moist, let it dry
out completely.
• Please ensure that the power cable never
gets wet or moist in use. Never allow it to
get pinched or otherwise damaged.
Should the power cable or the plug get
damaged, have the customer service
replace it before you use the
kettle again.
• Always pull the plug out of the socket
after use. It is not sufficient to switch it
off because the kettle is still on as long
as the plug is in the socket.
give them to the next owner when you pass on the toaster.
1.5 l Kettle
Please retain these instructions for later questions and

2. Technical Data

voltage ..................................: 230 V / 50 Hz
power consumption ......................: 2,200 W
Please observe the following instructions
to avoid the hazard fire or injury:
• Always heat the water with the cover clo-
sed, because the automatic
switch-off mechanism will not function
otherwise and boiling water may spill
over the edge.
• The kettle is very hot when in use and
hot clouds of steam may escape.
Therefore, always wear oven gloves.
• Make sure that the kettle is set up
vertically in a stable position before you
switch it on. Boiling water can make a
kettle fall over if it is not set up in a
stable position.
• Never leave a kettle unattended that is
generating heat.
Do not allow children or infirm persons to
handle it without supervision because
they may not always be able to correctly
assess potential hazards.
7