Advertisement
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Short bolt
1
2
( M6 x 35mm)
Screw
3
8
(M4 x 35mm)
Flat Washer
5
10
(6.5 x 19mm)
STEP 1
Attach seat frame (B) to the back (A) by using bolts (2), washers (4) and (5), as shown below. Tighten
with Allen key (6).
Attach Side Stretcher (E) to the back (A) by using bolts (1), washers (4) and (5), as shown below.
Tighten with Allen key (6).
Note: DO NOT tighten any of the bolts, until the stool is assembled, then put on a flat level surface
tomake sure the stool is level and then tighten the bolts.
ITEM : S-312
ISSUED NOV 04, 2014
HARDWARE LIST
Sketch
NO
2
4
6
- 3 -
Description
Qty
Long bolt
8
(M6 x 60mm)
Lock Washer
10
(6.5 x 11mm)
Allen Key
1
(K4x80mm)
Sketch
Printed in Vietnam
Advertisement
