Summary of Contents for compupool products GRC/J1400-3
Page 1
Generic Replacement Cell for Jandy Aqua Pure - 3 Port Instruction Manual Part Number: GRC/J1400-3, JRC/J700-3 Old Part Number: APURE1400, APURE700 (3 port cells only) Specifications: 40K gallons, 12K gallons, Compatible Systems: Aqua Pure For assistance please contact the Compu Pool technical and warranty hotline.
Page 2
Installation Generic Replacement Cell Installation To install the generic replacement cell for your Aqua Pure or other compatible saltwater chlorinator system, follow this procedure. 1.1.1 Turn power to the filter pump and chlorinator system off. 1.1.2 The Compu Pool GRC comes complete with a built in DC cell cable. The old cell cable will need to be disconnected from the circuit board in the power module.
Page 3
Maintenance Cell Maintenance To maintain optimal cell performance, it is recommended the cell is visually inspected every 3 months or after cleaning your filter. The electrolytic cell has a self cleaning feature incorporated in the controller system. In most cases this self cleaning action will keep the cell working at optimum efficiency.
Page 4
2.3.4 Do not use any sharp or metallic objects to remove scale. Scraping or scratching the cell plate's edge or surface will allow chemical attack of the plate, cause premature failure of the cell and will void the warranty. 2.3.5 If further cleaning is required the cell needs to be cleaned in a mixture of one (1) part Hydrochloric (Muriatic) Acid into four (4) parts water (always add acid to the water).
Page 5
Warranty 3.1.1 This generic cell carries the following warranty should fault occur due to faulty manufacture or materials. 3.1.2 Compu Pool Products warrants the original purchaser of the unit for a period of 2 full years (commercial installations for a period of 12 months) on the cell from the date of purchase should examination disclose to its satisfaction the unit has failed due to faulty manufacture or materials.
Page 8
CPP155 - Jandy GRC 3 Port Manual V2.docx...
Need help?
Do you have a question about the GRC/J1400-3 and is the answer not in the manual?
Questions and answers