Advertisement
CPSC Maintenance Menu Instructions
Changing the Model Selection
To change the CPSC Model settings, the technician / pool owner will have to access the maintenance
menu.
To access the maintenance menu and change the settings follow the procedure below:
Step 1:
Connect the Control Unit to mains power. Ensure
that the unit is turned on. This is done with the
on/off button. The POWER ON LED will come on
when the Control Unit is turned on.
2:29PM 20%
CPSC Maintenance Menu Instructions - Model Selection - V1.docx
3-7 Hilldon Court Nerang QLD 4211 Australia
P: +61 (0)7 5596 3773
F: +61 (0)7 5596 1951
W: www.compupool.com.au
Step 2:
Re-connect the mains power. As soon as the
"COMPUPOOL ULTRAKLEEN" screen comes on
simultaneously press the SUPERCHLOR and
WINTER MODE buttons for 10 seconds. Release
the buttons and the "MAINTENANCE MENU" will
be activated. All LED's will light up during this
process.
MAINTENANCE
MENU
1
Advertisement
Table of Contents
Related Manuals for compupool products CPSC
Summary of Contents for compupool products CPSC
- Page 1 W: www.compupool.com.au CPSC Maintenance Menu Instructions Changing the Model Selection To change the CPSC Model settings, the technician / pool owner will have to access the maintenance menu. To access the maintenance menu and change the settings follow the procedure below:...
- Page 2 "MAINTENANCE MENU" MENU" by pressing the SELECT BUTTON until the parameters will be stored. "TURN MAINS OFF THEN ON" screen is reached. TURN MAINS. . 2:32PM 20% OFF THEN ON CPSC Maintenance Menu Instructions - Model Selection - V1.docx...
Need help?
Do you have a question about the CPSC and is the answer not in the manual?
Questions and answers