Dell Precision 7760 Service Manual page 123

Table 8. System setup options—Security menu (continued)
Security
PTT Security
Absolute I
OROM Keyboard Access
SMM Security Mitigation
HDD Security
Computrace(R)
Admin Setup Lockout
Master Password Lockout
Table 9. System setup options—Secure Boot menu
Secure Boot
Secure Boot Enable
Secure Boot Mode
Expert Key Management
Expert Key Management
Custom Mode Key Management
Table 10. System setup options—Intel Software Guard Extensions menu
Intel Software Guard Extensions
Intel SGX Enable
Enclave Memory Size
Performance
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
HyperThread control
Power Management
Enable or disable Platform Trust Technology (PTT) visibility to the operating
system.
This field allows you to Enable, Disable, or Permanently Disable the BIOS
module interface of the optional Absolute Persistence Module service from
Absolute® Software.
Allows you to set an option to enter the Option ROM Configuration screens
using hotkeys during boot.
Allows you to enable or disable additional UEFI SMM Security Mitigation
protection.
Enable or disable the HDD Security.
Enable or disable the BIOS module interface of the optional Computrace(R)
Service from Absolute Software.
Enable to prevent users from entering Setup when an Admin Password is set.
Disables the master password support. Hard Disk passwords need to be
cleared before changing the setting.
Enable or disable the secure boot feature.
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures.
Enable or disable Expert Key Management.
Select the custom values for expert key management.
Enable or disable Intel Software Guard Extensions.
Set the Intel Software Guard Extensions Enclave Reserve Memory Size.
Enable multiple cores.
Default: Enabled.
Enable or disable Intel Speedstep Technology.
Default: Enabled.
NOTE: If enabled, the processor clock speed and core voltage are adjusted
dynamically based on the processor load.
Enable or disable additional processor sleep states.
Default: Enabled.
Enable or disable Intel TurboBoost mode of the processor.
Default: Enabled.
Enable or disable HyperThreading in the processor.
Default: Enabled.
BIOS setup 123