Memory Function; Muti-Stage Cooking - Toshiba ML-EM23PSS Instruction Manual

OPERATION

14. MEMORY FUNCTION

(1)
Press Memory to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
(2)
Press Memory until your desired procedure number appears in the display.
Press
procedure.
(3)
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
a.
Press "Memory" twice; screen displays 2.
b.
Press "Time Cook" , then press "3" , "2" and "0" in order.
c.
Press "Power" once, then press "8" for "PL 8" to display.
d.
Press
Or press
e.
To choose the procedure from the memory list, press Memory twice.
Screen will display "2". Press
NOTE:
Auto Menu cannot be set in Memory function.

15.Muti-Stage Cooking

At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
a.
Press "Memory" 3 times; screen displays 3.
Press "Time Cook", then press "5" , "0" and "0" to set first stage cook time.
b.
Press "Power"once, then press "8" to choose 80% first stage cooking
c.
power.
d.
Press "Time Cook" again, then press "1", "0", "0" and "0" to set second stage
cook time.
to begin it. A maximum of two cooking stages can be set for each
to save the procedure. Oven beeps once.
twice directly to save and start cooking.
to run procedure.
20