Advertisement
7.
Insert Panel Rest (D) into desired hole of
the Panel Jack (B).
9.
Insert the Top Support Extension (C) into
Panel Jack (B).
11.
Insert Straight Bolt (G) in between the 2 posts
of Top Support Extension (C) and tighten with
washer and nut. Repeat for Curved Bolt
Assembly (H).
Note: Make sure Curved Bolt is in front of
Straight Bolt.
8.
Insert washers and fully tighten nut on bolt
of the Panel Rest (D).
10.
Select desired height of Top Support
Extension (C). Insert Knob (F) into top
hole of Panel Jack (B), tighten knob to
lock Top Support Extension (C) in place.
12.
Insert Chain (I) into hook on side of Panel
Rest (D). Repeat on other side of Panel
Rest (D) with second Chain (I).
Advertisement
