Table of Contents
Advertisement
Quick Links
PRIOR TO INSTALL
Install footing and pole as per specifications. The following
instructions can be completed on the ground or on an installed
pole. Ensure install location averages 2 to 3 hours of direct midday
sun exposure for best performance. Please handle fixture and
solar engine with care as scratches will affect appearance and
powder coat durability.
TOOLS REQUIRED
• 5/32" hex bit
• 9/16" socket
• Torque wrench
1. PLACE SOLAR ENGINE ON POLE
Ensure to completely insert tenon into the solar
engine.
Solar Engine
3. AIM AND SECURE SOLAR ENGINE
Rotate solar engine such that the green arrow points
south. Use 5/32" bit to torque the 4x set screws to 86
in-lb.
Point Green
Arrow South
First Light Technologies
Document 70-0058 | 12 May 2021
© First Light Technologies Ltd.
INSTALL INSTRUCTIONS
BFL SERIES STREET LIGHT
Tenon
Tighten
Set-Screws
2. OPEN SOLAR ENGINE
Press the blue button on the side to unlock. Once
opened, prop stick will automatically engage to keep
lid open.
Push To
Unlock
4. PLACE FIXTURE ON ARM AND OPEN FIXTURE
Press the button on the underside of the fixture to
unlock.
Fixture
Push To
Unlock
Arm
www.firstlighttechnologies.com
info@firstlighttechnologies.com
Toll Free 1-844-279-8754
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for First Light BFL Series
Summary of Contents for First Light BFL Series
- Page 1 INSTALL INSTRUCTIONS BFL SERIES STREET LIGHT PRIOR TO INSTALL Install footing and pole as per specifications. The following instructions can be completed on the ground or on an installed pole. Ensure install location averages 2 to 3 hours of direct midday sun exposure for best performance.
- Page 2 Ensure the blue end is in the solar engine, and the yellow end is in the fixture. If using a First Light pole (sold separately), there is a rear hand hole to aid in running wires.
Need help?
Do you have a question about the BFL Series and is the answer not in the manual?
Questions and answers