Panasonic NV-VP32GN Service Manual page 34

NV-VP32GN / NV-VP32EE
Error Code Error Content
F610 ODC abnormality
F611 6626 QCODE
read Error
F612 No CRC
specific time
F630 No reply to KEY DET
enquiry
F631 CPPM KEY DET is not
available till the FILE
terminal
F632 CPPM KEY DET is not
available
Disc code
F103 Illegal highlight Position Big possibility of disc specification violation during
HIC Error
F4FF Force initialize failure
(time out)
Micro computer error
F700 MBX overflow
F701 Message
does not end
F702 Message
changes
F880 Task number
appropriate
F890 Sending message when
message is being sent
to AV task
F891 Message
sent to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language
abnormality
F896 No existence model
F897 Initialize
completed
F898 Disagreement
hardware and software
F8A0 Message command is
not appropriate
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
9.4. Last Error Code saved during NO PLAY
Error code
F0BF 6) Cannot playback because physical layer is not recoginizable
F0C0 8) DVD: Cannot playback because it is not DVD Video/Adio/VR
F0C1 9) DVD: Prohibited by the restricted region code
F0C2 A) DVD: PAL restricted playback
F0C3 B) DVD: Parental lock setting prohibits the playback of the entire title
F0C4 C) VCD: Prohibited because it is in PHOTO CD fromat
F0C5 VCD/CD: Prohibited because it is CDROM without CD-DA
Additional error explanation
No permission for command execution
don't Access failure to seek address in CD series
OK for a Access failure to ID data in DVD series
(for internal use only)
(CPPM file system is unreadable caused by
scratches)
Been revoked or falsified
highlight display
When replying message to disc manager
command Next message is sent before replying to disc
manager
command Message is changed before it is sent as a reply to
disc manager
is not Message coming from a non-existing task
Sending message to AV task
couldn't be Begin sending message to AV task
area Firm version agreement check for factory preset
setting failure prevention
Firm version agreement check for factory preset
setting failure prevention
is not Initialize completion check for factory preset
setting failure prevention
of Unsuitable combination of AV DECORDER,
SDRAM and FLASH ROM (firmware)
Begin sending message to AV task
Defect 1
DV2
(IC8001)
DV2
(IC8001)
DV2
(IC8001)
DISC
DISC
DISC
DV2
(IC8001)
FROM
(IC8101)
Serial
communicat
ion on lone
FROM
(IC8101)
Error Content
34
Defect 2 Defect 3 Defect 4
CPPM
(*1)
CPPM
(*1)
DV2
(IC8001)