Panasonic NV-VP32GN Service Manual page 11

STEP4.LINE-IN SETTING & ACTIVATE PLUG-IN A.T.P.
1. Press the Channel
simultaneously for more than 3 seconds until the
channel on the unit's display changes to 1, under the
condition of the no tape is in the unit.
2. Confirm that "A1" and "A2" can be displayed on the
FIP by pressing the CH UP and CH DOWN buttons.
3. Disconnect the AC plug for few seconds and
connect it again, and press POWER button for
turning the power to on from off to carry out the
"Plug in Auto Tuner Preset".
4. Since other than the channels that can be stored by
"Auto Tuning" operation are not available yet, preset
manually by consulting the note of its available TV
channels of which you took before.
STEP5.TAPE INTERCHANGEABILITY ADJUSTMENT
Refer to the Electrical Adjustment Procedures.
up and down keys
11
NV-VP32GN / NV-VP32EE