Quickstart Guide Contents What’s Included Downloading LogTag Analyzer Confi guring your TREL30-16 Starting your TREL30-16 During Recording Downloading Results...
What’s Included Please check you have the items shown below before continuing with setting up your TREL30-16. TREL30-16 LTI Interface ST10 External (Not included) Probe (Not included) Optional: Buffer assembly Wall mount (Not included) (Not included) Page 3...
Downloading LogTag Analyzer To download the latest LogTag Analyzer, open your browser and navigate to: https://logtagrecorders.com/software/LTA3/ 1. Click ‘Go to downloads page’ to take you to the download page. 2. Click ‘Download Now’ to start the download. 3. Click ‘Run’ or ‘Save File’ then double-click the downloaded file to open the LogTag Analyzer Setup Wizard.
Page 5
Downloading LogTag Analyzer continued... 4. Follow the on-screen prompts to install LogTag Analyzer. 5. Click ‘Finish’ to exit the LogTag Analyzer Setup Wizard. Note: If you already have LogTag Analyzer installed, please see whether you need to update to the latest version by clicking ‘Check Internet for updates’...
1. Open LogTag Analyzer. 2. Click ‘Configure’ from the ‘LogTag’ menu or click the ‘Wizard’ icon. 3. Adjust your logger configuration settings as required. For more information on configuration...
Starting your TREL30-16 Display overview: Time Indicators Recording State Indicators Time Value ALERT/OK Indicator Reading Type Battery Low Symbol Alarm Threshold Markers Day Number Day Alarm Temperature Temperature Markers Unit Please ensure the sensor is connected before starting Please ensure the sensor is connected before starting your TREL30-16.
During Recording Reset Trip Min/Max Temperatures: The currently stored Min/Max temperature values can be reset at any time while the unit is recording, but not once the unit has been stopped. To reset the values, please refer to the Product User Guide. To view other information about clearing alarms and reviewing Min/Max trip temperatures, please also refer to the...
1. Open LogTag Analyzer. 2. Click ‘Download’ from the ‘LogTag’ menu or press F4. After a few seconds, the downloaded data will appear. Data can be displayed in Report-, Chart-, Data-, Summary- or Day Summary formats by clicking the tabs at the bottom of the chart dialog.