Advertisement
Attaching Vento to a Mount
Vento has a standard UNC 1/4" camera thread (Figure 3:10) on
its rear side. Attach Vento to a mount with this thread.
Alternatively, the flexible attachment loop (Figure 3:12) can be
used to mount Vento to Quha Vento Headband.
Cable tie can also be used to mount Vento. In this case the cable
tie is wrapped around the narrowest part of Vento.
Settings
There are two switches (Figure 3: 8, 9) that control the user
selectable features of Vento. The switches are located under the
battery slot cover. The switches can be set using a flathead
screwdriver included in the sales package.
Sensitivity switch changes the sensitivity of the puff sensor.
Off - Low sensitivity
On - High sensitivity
Buzzer switch turns the switch buzzer sound indicator on and
off.
Off - Buzzer sound off
On - Buzzer sound on
High sensitivity setting can be used when faster response to a
puff is required. Low sensitivity is useful if the puff sensor picks
unwanted clicks.
Indicator Lights
There are two indicator lights (Figure 2: 6) on the front panel of
Vento. When the puff sensor detects air flow that activates the
6
Advertisement
