Page 2
Quha Sento Contactless Puff Switch Quha Sento is a contactless puff switch that is used to perform a short mouse click (clicking) or a long mouse click (dragging) together with the Quha Zono gyroscopic mouse.
Installation Quha Sento is delivered in two parts: the headband and the cradle. The cradle has the puff sensor arm attached to it. 1. The headband is attached to the cradle by pushing the headband into the cradle connector until it is fully inserted.
Page 4
Using Quha Sento Quha Sento detects the air flow (puff) coming from the user’s mouth. The puff sensor is located at the end of the sensor arm. The more air flow there is to the sensor, the more accurately the switch can be controlled.
Another way is to increase the distance between mouth and the sensor. If the puff sensor rubs the user's clothing or skin when Sento is put on, this may be picked up by the sensor. The easiest way to avoid random clicks in this case is to turn on Zono only after the Sento has been placed on the user's head.
As a contactless puff switch, Quha Sento is easy to keep clean. In the case of dust or saliva getting into the puff sensor, Quha puff switch cleaning spray is used to clean the sensor. It is a safe way to clean Quha Sento and is available from Quha resellers.
Page 8
Designed and manufactured in Finland by Quha. www.quha.com Copyright 2016 Quha oy. Quha, the Q-mark, Quha Zono and Quha Sento are trademarks or registered trademarks of Quha oy.