Mitsubishi Electric MA-E85R-E Service Manual page 20

„ PM2.5 and Dust Count Mode
1 Starting procedure
A. When the "On/Off" switch is OFF, press the "Manual" switch and "Auto" switch 6 times
simultaneously.
B. Turn ON the "On/Off" switch within 2 seconds.
C. Turn OFF the "On/Off" switch to end the PM2.5 and dust count mode.
a. PM2.5 count indication (binary number)
Corresponding bit
Lit LED
Example: When there are 15 particles of 0.5 to 2.5 μm
b. Dust count indication (binary number)
Corresponding bit
Lit LED
Example: When there are 13 particles of 2.5 μm or larger
7-bit 6-bit 5-bit
Auto
Low Mid
Cleaning
5-bit 4-bit
PM2.5 (upper) PM2.5 (middle) PM2.5 (lower)
20
4-bit 3-bit 2-bit
Smart
High Night
Search
: Lit
3-bit 2-bit
Dust (upper)
: Off
: Lit
1-bit 0-bit
Clean Dust Replace
Box Filter
: Off
1-bit 0-bit
Dust (middle) Dust (lower)