Nokia Customer Care
Good output
Figure 12: The output of the phone on a spectrum analyzer should look like the figure on the left
If using the AAS-10 probe with the phone connected to the call box, the amplitude
should be approximately -7 dBm at the antenna test point on the top of the PWB.
TX DC Probe Points
Following are the transmitter DC probe points on the top side of the PWB. See Table 1 on
page 20 for test point descriptions and values.
1
Issue 1 08/2004
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20)
2
10
9
Figure 13: Top side TX DC test points
©2004 Nokia Corporation
Troubleshooting - RF
Bad output
4
3
Company Confidential
5
6
7
8
Page 19