Nokia Customer Care
3. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
4. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in the status bar.
5. Open the Troubleshooting menu, point to RF, and click CDMA Control.
The CDMA Control dialog box appears.
Figure 10: CDMA Control dialog box for Cell TX troubleshooting
6. Select the following values on the CDMA Control dialog box.
State = Rho ON
•
Band = Cell
•
Radio Configuration = Mode 1: IS-95 Voice
•
Select the Set default PDM values check box.
•
7. Click Execute.
8. Open the Troubleshooting menu, point to RF, and click PDM Control.
Issue 1 08/2004
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20)
Figure 9: RF Main Mode dialog box
©2004 Nokia Corporation
Troubleshooting - RF
Company Confidential
Page 15