Table of Contents
Advertisement
CE Statement
Caution
This is a Class A product. In a domestic environment, this product might cause radio interference, and
the user might be required to take corrective measures.
The standards compliance label on the SilkWorm 4016 contains the CE mark which indicates that this
system conforms to the provisions of the following European Council directives, laws, and standards:
•
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the Complementary Directives
92/31/EEC and 93/68/EEC
•
Low Voltage Directive (LVD) 73/23/EEC and the Complementary Directive 93/68/EEC
•
EN50082-2/EN55024:1998 (European Immunity Requirements)
-
-
Canadian Requirements
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations, ICES-003 Class A.
Laser Compliance
This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.
Caution
Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and comply
with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with
IEC 825-2. Optical products that do not comply with these standards might emit light that is hazardous
to the eyes.
RTC Battery
Caution
Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the battery is
incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock begins to lose
time.
SilkWorm 4016 Hardware Reference Manual
Publication Number: 53-1000175-01
EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)
EN61000-3-3
Regulatory Compliance
A
A-5
Advertisement
Table of Contents
