Beem Dynamic i-Power User Manual page 25

EN
Temperature regulator
The following table and the labels at-
tached to garments indicate which temper-
ature setting should be used for ironing.
Level Function
OFF appliance switched off
low temperature, suitable for
●
nylon, silk
medium temperature, suit-
●●
able for wool
high temperature, suitable
●●●
for cotton
highest temperature, suitable
MAX
for linen
Special functions of the appliance
■ The appliance is equipped with an
electronic temperature setting,
which reliably sets and maintains the
selected temperature.
■ The appliance is equipped with an
automatic safety switch-off. Both
function when the appliance is in a
horizontal or vertical position.
–
When you insert the plug into the
mains socket, the appliance begins
to heat up and the control indicator
(11) lights up. When the set temper-
ature has been reached, the control
indicator (11) flashes ― the appli-
ance is on standby.
–
When your grip the handle (6), the
appliance switches itself on (au-
tomatic switch-on, fig. A) and the
control indicator (11) lights up con-
tinuously.
BEEM - Elements of Lifestyle
DYNAMIC i-POWER
–
When you let go of the handle (6),
the appliance switches itself off (au-
tomatic safety switch-off, fig. B) and
the control indicator (11) flashes.
–
To reactivate the appliance, you
must grip the handle (6) again and it
will switch itself on.
■ The anti-drip system prevents water
from dripping out of the ironing sole at
low temperatures.
■ The appliance slides smoothly over the
fabric due to the ceramic coating of
the ironing sole (16).
■ The anti-liming system of the appli-
ance removes calcification from the
water if you use tap water for steam
ironing instead of distilled water (Fill-
ing with water section).
self-cleaning function removes
■ The
calcium residues from the appliance,
see Cleaning and care section.
23