Advertisement
Quick Links
#2 from R –AL-18
Right Most – AL-24
©2013 Hi-Z Antennas™
Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Base Insulator UPGRADE Manual – pg 1/6
L to R: .875, .750, .625 &
.500 (AL-24 ONLY)
This latest re-design of the AL series base insulator totally liberates the
Full performance of these verticals. They yield a very low base capacitance (pF).
WARNING: Avoid HAZARDOUS LOCATIONS. Stay Clear of Power Lines
And or any overhead obstructions.
HF RECEIVING
HIGH PERFORMANCE
SYSTEMS & COMPONENTS
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hi-Z Antennas AL-18
Summary of Contents for Hi-Z Antennas AL-18
- Page 1 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Base Insulator UPGRADE Manual – pg 1/6 L to R: .875, .750, .625 & .500 (AL-24 ONLY) This latest re-design of the AL series base insulator totally liberates the Full performance of these verticals. They yield a very low base capacitance (pF).
- Page 2 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 2/6 CHOOSING A LOCATION FOR THE ANTENNA For best performance, mount the antenna in a clear location away from buildings, towers, feedlines, utility wires, and other antennas. Never mount this antenna in a location that will permit unsuspecting people to come in contact with any part of the antenna.
- Page 3 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 3/6 Element UPGRADE Assembly Instructions Please review the last page. These are the mounting dimensions when attaching the vertical and insulator to the mount. REFERENCE ONLY-- Lower all verticals. Remove the existing base insulator as it will be retired.
- Page 4 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 4/6 Cable ties to WX-Proofing Pipe to the mount - takes 2 cable ties per holding joint Holding cable tie- Holds amp inside pipe HIGH PERFORMANCE HF RECEIVING SYSTEMS & COMPONENTS...
- Page 5 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 5/6 AL-24 Vertical Base Mounting Dimensions PVC SHIM 4ea 6x32 SS k-locks 12” L X .875”OD base tube ¾” X 7” Fiberglas rod 2ea 6x32x1.5” SS PH screws 875” X 6ft element base tube –...
- Page 6 Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 6/6 .875” element Top of 12” x .875 base tube Base tube Flush with top of angel mount Element terminal 13” wire Hi-Z Amp Element Wire SHIM #20 SS Clamps Holding Cable Ties For 4”...
Need help?
Do you have a question about the AL-18 and is the answer not in the manual?
Questions and answers