Table of Contents
Advertisement
Instruction manual
Espresso machine with integrated milk system
Descaling the water reservoir
1
Fill the reservoir with fresh, undiluted white household vinegar.
2
Leave the vinegar in the water reservoir overnight.
3
Discard the vinegar by removing the reservoir and emptying it.
4
Rinse the water reservoir thoroughly with tap water by half-filling the
tank with water and emptying it. Repeat this step twice.
Descaling the coffee machine
1
First, descale the inside of the water reservoir by following the descaling
steps above.
2
Switch the power button to the "O" position and unplug the machine.
Fill the reservoir with white vinegar above the minimum level fill line.
3
Insert the porta-filter (with filter and no coffee) and place a jug, carafe
or regular cup on top of the drip tray, under the porta-filter.
4
Plug the power cord into the electrical outlet.
5
Switch the power button to the "I" position. When the 3 control panel
lights turn solid blue, press the "Espresso/Custom" key twice. The
vinegar will start flowing through the unit. It will stop automatically once
the process is completed.
6
Place a jug or large cup (with at least 325 ml/ 11-ounce capacity) under
the tube. Fill the milk reservoir with water and place it back on the unit.
Turn the froth control dial clockwise to the clean position " ". Next,
press the "Latte/Clean" key for 3 seconds to activate the cleaning
function. Let the unit dispense the water through the tube for
approximately 30 seconds and then press the "Latte/Clean" key once
to end the process.
7
Repeat steps 1-7 as many times as necessary, using tap water to rinse
any remaining traces of vinegar from the machine.
18
Instruction manual
Espresso machine with integrated milk system
Technical specifications
Model: JLPE 028
Rated input: 220-240V / 50/60Hz
Rated output: 1230-1470W
Milk tank capacity: 700ml
Water tank capacity: 1.2L
Servicing and disposal
This product should only be repaired or serviced by an authorised service
engineer. Only genuine, approved spare parts should be used.
This symbol
household waste and should be recycled. John Lewis & Partners does not
operate in-store take back, but as a member of the Distributor Take Back
scheme has funded the development and upgrade of recycling facilities
across the UK.
Please take your old appliance to your nearest collection facility. For further
details, contact your local council or visit: www.recycle-more.co.uk
indicates that this product should not be treated as normal
19
Advertisement
Table of Contents
