Table of Contents
Advertisement
Instruction manual
Espresso machine with integrated milk system
Cappuccino
A cappuccino is made with one part espresso, one part steamed milk and
one part frothed milk.
Latte
A latte is made with three parts steamed milk to one part espresso.
Selecting a function
Espresso
•
Press the "Espresso" key once to brew one single shot.
•
Press the "Espresso" key twice to brew a double shot.
•
Press and hold the "Espresso" key for 3 seconds to customise the
brewing process. When you have finished, press the "Espresso" key
once again to end the process.
The unit will start brewing the espresso according to your selection.
The unit will turn off automatically and the indicator lights will shine uninterruptedly
to show that the process is complete.
!
Note: To brew less coffee than the preset serving, press the function button
to stop the brewing process when the desired level of coffee is reached.
Cappuccino
Prior to preparing your cappuccino, adjust the quantity of frothed milk
according to your preference by turning the froth control dial to the right for
more foam and to the left for less foam.
Note: The foam intensity can be adjusted during the brewing cycle.
•
Press the "Cappuccino" key once to brew a small cup of cappuccino.
•
Press the "Cappuccino" key twice to brew a large cup of cappuccino.
Latte
Prior to preparing your latte, adjust the quantity of frothed milk according to
your preference by turning the froth control dial to the right for more foam
and to the left for less foam.
•
Press the "Latte" key once to brew a small cup of latte.
•
Press the "Latte" key twice to brew a large cup of latte.
Frothing milk
The machine also allows you to froth milk. Press and hold the "Cappuccino"
key for 3 seconds to add more foam to your coffee or to froth milk for any
other beverage such as a macchiato, hot chocolate or chai latte. When the
14
Instruction manual
Espresso machine with integrated milk system
milk is frothed, press the "Cappuccino" key again to end the process.
After preparing milk
Once you have finished preparing your milk, you can either store the milk reservoir directly in the refrig-
erator ready for its next use or dispose of the leftover milk.
Troubleshooting
Problem
Cause
1
There is no water in reservoir.
2
The coffee grind is too fine.
3
There is too much coffee in
No coffee is
the filter.
dispensed.
4
The appliance was not turned
on or plugged in.
5
The coffee has been tamped /
compressed too much.
1
The porta-filter has not been
rotated to the full-lock position.
Coffee leaks from
2
There are coffee grounds
the edge of the
around the filter basket rim.
porta-filter.
3
There is too much coffee in
the filter.
The milk is not
foaming properly
1
The machine has run out of
after frothing or
steam.
it is not being
2
The milk is not cold enough.
dispensed from
3
The frothing tube is blocked.
the frothing tube.
1
The ground coffee is too
The coffee dis-
coarse.
penses too quickly.
2
There is not enough coffee in
the filter.
1
The small filter has been used
The coffee is too
for a double shot of espresso.
weak.
2
The ground coffee is too coarse.
The three control
panel lights are
The water tank is dry.
flashing alternately.
Solution
1
Add water.
2
Grind medium-ground coffee.
3
Remove coffee from the filter.
4
Plug the unit in and turn it on.
5
Refill the filter basket with
coffee but do not tamp down
too much.
1
Rotate the filter holder to the
full-lock position.
2
Wipe the filter basket rim.
3
Remove some of the coffee.
1
Ensure there is enough water
in the reservoir.
2
Chill milk and frothing jug
prior to making cappuccino.
3
Follow the instructions to
clean the milk reservoirs and
frothing tube.
1
Use a finer grind.
2
Use more coffee.
1
Use a large filter for a double
shot of espresso.
2
Use a finer grind.
Add water to reservoir.
15
Advertisement
Table of Contents
