Operating Procedure
I. Read this manual carefully before proceeding.
II. Start power source and allow for warm-up.
III. Verify the compressor is disengaged.
IV. Engage hydraulic system per company policy.
V. Engage compressor
Shutdown Procedure
I. Disengage compressor circuit.
II. Relieve system of stored air.
Operating Conditions
The following conditions should exist for maximum
performance of the compressor:
● The machine should be as close to level as
possible when operating.
● Ambient temperature for operation should be
below 100°F (38°C).
experience high temperature shutdown above
this level.
Installation & Operation
The machine may
- 12 -
310969