Cisco Rainier Satellite D9865 Quick Tips page 2

 If you ordered our optional Data pre load service this will already be
done for you.
• Setup Channel Groups
To add a new preset (channel group) select a number 1-64.
OuickVersion
On
Remote
Press:
Setup
Tuning/Preset
Enter
Preset
Enter a number 01-64
Enter a name (use red button for keyboard)
Set Modulation type DVB S or DVB S2
Set Downlink frequency
Set Symbol rate
Set Net ID
Save
Activate
TIP
When entering in data. Highlight field by pressing OK to change.

decimal point please ignore.
Downlink = 03970 Enter:03.970000 GHz
Symbol Rate = 30000Enter: 30.0000 MS/s
NetId = 15 Enter: 00015
If you enter in data incorrectly you will not receive a correct signal lock. Please check carefully when
entering.
Detailed Explanation
Press Setup on Remote:
The first screen is the Setup menu. Tuning / Preset is highlighted, Press OK.
To enter in a new service into a preset, push the YELLOW button, the next menu will have PRESET
NUMBER highlighted. Next press OK and the first number will turn black. You can change this number
either using the up down arrow or Direct enter the number using the remote numerical keys on the
remote, press OK. Then press the down arrow once, then OK.
You cannot enter in