Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Accora FloorBed 2 Siderails
Summary of Contents for Accora FloorBed 2 Siderails
- Page 1 Accessories FloorBed 2 Siderails IFU-FL2-003 EN REV 01 October 2017...
-
Page 2: Table Of Contents
Cleaning and disinfection This instruction manual applies to the Troubleshooting FloorBed 2 Siderails. Storage The FloorBed 2 Siderails are designed to be Guarantee used by patients who have a FloorBed 2. Disposal Before operating with this accessory, you must Daily inspection... -
Page 3: General Warnings
Only use siderails, and other accessories, that in accordance with it. are compatible with this bed as supplied by The FloorBed 2 Siderails MUST not be used if faults Accora. Incompatible siderails can create have been detected that may injure the serious hazards. -
Page 4: Technical Specification
SDREX-0-FL2-100 storage -4°F to +122°F Siderail fitting bracket set SDRBR-0-FL2-200 If the FloorBed 2 Siderails are stored in conditions (fits 2000 and 2200mm) outside the normal operating range, they should be 2000mm Fabric and bars set FABKIT-0-CB1-000 allowed time to stabilise, in normal operating conditions, before use. - Page 5 Identify all components: Note - Throughout this user manual, the left side and right side of the bed are described from the viewpoint of a patient lying in the bed. Fabric Cover Quantity 2 Head end Left side Bottom Bar Quantity 2 Right side Foot end...
- Page 6 5. Remove the mattress platform locking pin and R- 8. Align the siderail locking pin hole and the mattress clip. platform locking pin hole. 9. Fit the locking pin and R-clip. (50mm Long, supplied with the siderails). Note – This pin will not be needed to fit the siderails. Store safely for use should the siderails be removed.
- Page 7 10. Fit the Bracket Fixing Screw (35mm long) using a 14. Remove one of the Fabric Covers of the siderail 5mm Allen key. from its packaging and spread it out on a flat surface with the labels facing up. (‘Top and Outside’...
-
Page 8: Using The Siderails
20. Ensure ALL the plastic guides are fitted into the 23. The siderail is now fitted to one side of the bed. sliding track. (4 Plastic guides each end.) 21. Insert the bottom bar into the sliding track at both ends of the side rail. 24. - Page 9 Siderails must be raised and lowered one end, or one Ensure the siderail is properly raised and latched ‘corner’, of the bed at time. by pushing down gently. To raise the siderail: Use the lifting handle to raise the siderail. To lower the siderail: Pull firmly upwards on the lifting handle.
-
Page 10: Functionality Check
Do not place 12. Is each side rail bracket is secured to the outside heavy or sharp objects on the FloorBed 2 Siderails. Do of the head/foot board with a bolt and nut and not store in damp conditions. -
Page 11: Disposal
If any damage, performance issue, or cause for Do the FloorBed 2 Siderails operate as per the concern is noted during this inspection, the FloorBed intended purpose without unexpected noise or... - Page 12 Accora Charter House Barrington Road Orwell Cambridge SG8 5QP T: +44 (0)1223 206100 F: +44 (0)1223 206120 info@accora.uk.com www.accora.uk.com...
Need help?
Do you have a question about the FloorBed 2 Siderails and is the answer not in the manual?
Questions and answers