iLive IAEBTS410 User Manual

Truly Wireless Earbuds With Speaker
User's Guide for Model IAEBTS410 v2460-01
Microphone

Charging the Earbuds

1. Open the cover and place the earbuds on the charging contacts. Be sure to
match the left and right earbuds with the correct docking station in the case.
2. The earbuds will automatically start charging. When charging, the LED
Indicators on the earbuds will turn red. When charging is complete, the
indicators will turn off.

Charging the Case

Using a Micro-USB to USB cable,
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case.
When charging the case
the LED will flash red, when
charging is complete it will turn
solid red.
Function Touch Pad
Note: Function Touch Pad is sensitive and must be touched
or tapped to operate properly.
Earbuds auto power ON when removed from case. If not
touch and hold for three seconds to power ON.
Tap one of the earbuds once to pause or resume playback.
Quickly tap right earbud two times to skip to next track.
Quickly tap left earbud two times to skip to previous track.
Quickly tap any earbud three times to activate SIRI.
Touch and hold for five seconds to power OFF.
Flashes blue when powered on, or connected to
device. Alternately flashes red and blue when
ready to pair.
Earbuds on Charge Contacts
Solid red when charging.
Light turns off when fully charged.
Case Speaker
Charging LED Indicator will turn
solid blue when charging the
earbuds. Light will turn off when
charging is complete.
Earbud LED Indicator