Conduit
- MIDI Hub
Pedalboard Mounting Instructions
Conduit features built-in threaded hardware for easy mounting on the
top or bottom of most pedalboards.
DRILL TEMPLATE
Choose your MOUNTING location
1
Tape the Drill Template (included and available for download at
strymon.net/support) logo side up in the location you want to
install your Conduit.
This illustration shows mounting on the top of your pedalboard.
Drill holes
2
Drill through the two marked hole locations with a 1/8" (3mm) bit.
Attach Conduit
3
Place Conduit over the holes. Install from the reverse side of your
pedalboard using #4-40 3/8" screws (included).
HOLE LOCATIONS
#4 SCREWS
pg 16