English (Original Instructions) - DeWalt DCF6202 Original Instructions Manual

COLLATED MAGAZINE ATTACHMENT
DCF6202
Congratulations!
You have chosen a D WALTSTANLEY FATMAX tool. Years of
e
experience, thorough product development and innovation
make D WALTSTANLEY FATMAX one of the most reliable
e
partners for professional power tool users.
Technical Data
Screw length suitability
Weight
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Additional Specific Safety Rules for Collated
Magazine Attachment
• The collated magazine is to only be used with the D
DCF620 screwdriver.
• Observe all operating instructions and safety regulations
contained in the manual for the screwdriver the magazine
accessory is used with.
•
•
•
DCF6202
mm 25–57
•
kg 0.36
•
•
•

Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
•
•
•
•
Package Contents
The package contains:
1 Collated magazine attachment
1 PR2 collated screwdriver bit
1 Instruction manual
•
•
WALT
e
Before use, ensure that the magazine accessory is properly
attached to the tool.
Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
Disconnect the battery pack from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
When driving screws, never reach into the magazine
accessory. Keep hands clear of the advancing mechanism and
the spot where the screw is being driven.
Do not use the magazine accessory as a gripping surface.
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electric shock.
Use only screw strips that are suitable to this magazine. Only
insert screw strips when the battery is disconnected from the
screwdriver and the trigger is locked.
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Impairment of hearing.
Risk of personal injury due to flying particles.
Risk of burns due to accessories becoming hot
during operation.
Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.
EngLIsh
11