RODUCT NTRODUCTION Thank you for purchasing a fork-mountable work platform (“platform” or “work platform”) made by Vestil Manufacturing Corporation (“Vestil”). Our platforms are durable, high-quality products that combine safety-conscious design features and rigorous engineering. Although use and maintenance procedures are relatively intuitive, all persons who might use or maintain this product must familiarize themselves with the instructions provided in this manual.
Page 3
Employees and any other persons who might assemble, use, or perform maintenance on the platform must read and understand every instruction BEFOREHAND. Users should have access to the manual at all times and should review the directions before each use. Contact Vestil for answers to any question that remain after reading the entire manual.
Failure to adhere to the directions in this manual might lead to serious personal injury or even death. Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: 1) the instructions that appear in this manual;...
(see p. 12). 7. Product labels: all labels should be readable and located as shown in the diagram on p. 14. If a label(s) is unreadable or missing, contact Vestil to order a replacement. At least 1 time per month, inspect: 1.
10211 ½ in. x 2in. hex head bolt 36109 ½ in. – 13 UNC hex head nut Cold shut (secures nylon safety strap to midrail) Nylon strap Close-up of tine lock assembly 6 of 14 Copyright 2010 Vestil Manufacturing Corp.
Immediately lower platform to the ground; then Straighten the mast guard Close-up of connection between top and bottom portions of mast guard. (return vertical orientation) and retighten the bolts and nuts. 7 of 14 Copyright 2010 Vestil Manufacturing Corp.
However, the lock might not fit over the heel of the tine of your fork truck. If this is the case, do not modify the tine lock; simply do not use it. 8 of 14 Copyright 2010 Vestil Manufacturing Corp.
Only use the work platform on smooth, level, finished surfaces capable of supporting the combined weight of the person(s) occupying the platform and all equipment and/or material present on the platform, the platform, and the fork lift. 9 of 14 Copyright 2010 Vestil Manufacturing Corp.
SLOT Nylon safety strap Once the guard is nearly vertical, lift it to allow the pegs to fit into the slots as the guard drops into position. 10 of 14 Copyright 2010 Vestil Manufacturing Corp.
Page 11
9). To order replacement parts: Vestil uses only quality parts to make the equipment we manufacture. Vestil bears no responsibility for problems that result as a consequence of using unapproved replacement parts. To order replacement or spare parts for this equipment, contact the factory.
Work platform with casters installed post Caster stem Knurled nut Expansion Insert caster rubber into corner post; bottom of Plastic spacer post should Handrail rest on tightening hub post Tightening hub Caster rig 12 of 14 Copyright 2010 Vestil Manufacturing Corp.
Work platform attached: unplug the jumper cord from the FTJB socket; then plug the male plug of the coil cord into the socket of the FTJB. Pull the E-stop button out. 13 of 14 Copyright 2010 Vestil Manufacturing Corp.
D, E & F D, E & F WP-series platforms SP-series platforms WP-3737-FD A (Label #080) B (Label #082) C (Label #525) D (Label #287) E (Label #253) F (Large Vestil logo) 14 of 14 Copyright 2010 Vestil Manufacturing Corp.