Promax EN-106 Quick Start Manual page 6

QUICK START GUIDE. EN-106
• MENU NAVIGATION KEYS:
• STARTING BASIC SETUP:
1.- Press OK
2.- It appears the field "PASSWORD". Enter the access code. (By default: 0000).
3.- Press OK
4.- It appears the "FREQUENCY" field. Press OK
frequency of the digital output signal (by default: 474 MHz). Press OK
exit the option.
5.- Press RIGHT
Select the attenuation for the digital output signal (by default: 20 dB).Press OK
again to exit this option.
6.- Press RIGHT
press OK
For more information refer to the user's manual at
- 0 DG0085 -
Select parameter / menu.
Move Right / Left between menu / characters.
Increase / Decrease value of the figure / field.
.
.
until the "ATTENUATION" field.
until the "SAVE CHANGES" field. To save the changed values
.
to enter in edit mode
Press OK
http://www.promaxelectronics.com
.
Select the
again to
to enter in edit mode.
04-2013