Step; Att; S Meter Sql; Bell - Yaesu FT-70DR Instruction Manual

Adms-10

Hide thumbs Also See for FT-70DR:

Table of Contents

• Step

Sets the channel step for receiving channels.

By ticking the checkbox of this item, the receive sensitivity is lowered by about 10dB. This is useful when,

for example, an adjacent strong radio wave interferes with the reception.

Configure the normal noise squelch setting, and also the S-meter squelch level setting.

Outputs a ringing tone when receiving a signal that satisfies the conditions set from the squelch type.

Set the number of times the tone (bell) rings.

Lowers the transmit deviation to approximately half.

When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the

checkbox). This may improve the situation.

Usually, this item is set to "OFF" (un-tick the checkbox).

Comments may be added to the edited VFO channels. Up to 255 letters can be used. This function

is useful in organizing the VFO channels by, for example, applying a category name to each channel.

These comments are not transferred to the FT-70DR/DE.

ADMS - 10 Instruction Manual

Table of Contents

Show Quick Links

Table of Contents

Ft-70de