Advertisement
Using the Power Management
For model HCI604TB3
Using power management you can set the total power to 2.5kW/ 3.0kW/ 4.5kW/
6.5kW and 7.4kW. The default total power setting is the maximum power level.
Setting the total power level to fit your requirement
1. Make sure the cooktop is turned off.
Note: you can only set power management when the cooktop is turned off.
2.Touch the icon "Pause" and hold for 5 seconds. You can hear the buzzer beeps
one time.
3.After you hear the beep, touch "+" and "-" icon at the same time and hold for 3
second, the timer indicator will show flashing previous total power level, e.g.
'2.5'. Touch and hold " +" and " -" for 1 second again to switch to other power
level, for example 3.0. When the power that you want is flashing, touch the icon
"Pause" and hold for 5 seconds. The buzzer will beep 10 times. It means you
have finished the setting.
Note:
1. After step 2, you must touch the "+" and "-" within 3 seconds after you hear
the beep. Otherwise you will need to start again from step 2.
2. Once finish setting, wait till the end of 10 beeps. Do not touch any icon during
this period. Otherwise the setting will be invalid.
Advertisement
