Midea F Series Manual page 33

1. Hold the slot under the front panel, then uplift it outwards and remove the front panel
(See Fig.1).
2.Pinch the handle under the air filter and make the air filter arched， remove it from the slot from
underside to upside (See Fig.2).
Step 2 Remove the frame.
1.To meet different requrement of different type of air conditioner, there are four kinds of removing the
frame.
-Remove the two screws on the left and right chassis fixing brackets, then remove the two chassis
fixing brackets as shown in Fig.3A.
-Remove one screw on the chassis fixing bracket, then remove the chassis fixing bracket. Remove the
two screws located on the back of the cabinet as shown in Fig.3B..
-Remove one screw on the chassis fixing bracket, then remove the chassis fixing bracket as shown in
Fig.3C.
-Remove the four screws located on both sides and the back of the cabinet as shown in Fig.3D.
2.Grasp the left corner of the frame's underside, release the coupler plugs, then loosen the frame. (See
Fig. 4).
Step 3 Installation
1. Remove the screws fix the chassis-fixing board and cabinet. some Models have two more screws
on the back of the cabinet. (see Fig.5)
31