Introduction; Visual Quality Requirements - Nokia RH-66 Troubleshooting Manual

Nokia Customer Care

Introduction

The mobile terminal incorporates an internal antenna. This antenna arrangement is used
for AMPS/Cell and PCS frequency bands. The internal antenna assembly consists of a
Planar Inverted-F Antenna (PIFA) used for the cellular engine and an Inverted-F antenna
(IFA) used for the GPS engine, which is placed on the side of internal antenna body.

Visual Quality Requirements

Following are the minimum acceptable visual quality requirements of the internal
antenna assembly:
• Gloves must be used when handling antennas. Do not touch the antenna radiator
with bare hands.
• No visual cracks or mechanical defects.
• No oil, dirt, or particles are present on the parts.
• Radiator must be aligned with the plastic housing.
• GPS antenna contacts must be inside the plastic housing.
• Radiator must be flat with no warping.
• All pins must be at the same level.
Issue 1 03/2005
©2005 Nokia Corporation
2115i/2116/2116i (RH-66)
Antenna Description and Troubleshooting
Company Confidential Page 3