Safety Information - SEFRAM 7307 User Manual

Safety Information

Understand and follow operating instructions care-
fully. Use the meter only as specified in this man-
ual; otherwise, the protection provided by the
meter may be impaired.
WARNING
․ When using test leads or probes, keep your
fingers behind the finger guards.
․ Remove test lead from Meter before opening
the battery door or Meter case.
․ Use the Meter only as specified in this manual
or the protection by the Meter might be
impaired.
․ Always use proper terminals, switch position,
and range for measurements.
․ Never attempt a voltage measurement with the
test lead inserted into the A input terminal.
․ Verify the Meter's operation by measuring a
known voltage. If in doubt, have the Meter
serviced.
․ Do not apply more than the rated voltage, as
marked on Meter, between terminals or
between any terminal and earth ground.
․ Do not attempt a current measurement when
the open voltage is above the fuse protection
rating. Suspected open circuit voltage can be
checked with voltage function.
․ Only replace the blown fuse with the proper
rating as specified in this manual.
․ Use caution with voltages above 30 Vac rms,
42 Vac peak , or 60 Vdc. These voltages pose
a shock hazard.
․ To avoid false readings that can lead to electric
shock and injury, replace battery as soon as
low battery indicator  appears.
․ Disconnect circuit power and discharge all high-
voltage capacitors before testing resistance,
continuity, diodes, or capacitance.
․ Do not use Meter around explosive gas or
vapor.
․ To reduce the risk of fire or electric shock do not
expose this product to rain or moisture.
13