Additional Tools - Uniz SLASH 2 User Manual

Note
: Timer resetting is imperative step in accessories replacing, otherwise running time will
getting inaccuracy.
Start Job:
Click 'Start' Button
printing.
(1). Send Data to Printer: Click 'Start' Button
printer.
(2). Complete File Transfer: Once you click Start, UNIZ Desktop's progress bar and the
printer's front LED button will indicate the file transfer progress by lighting in blue.
(3). Confirm Print Job: Make sure that your printer is ready to print and then touch the
printer's front button to confirm print job.
:
Warning
Before final confirmation, please make sure the Build Platform, Resin Tank are
installed. Make sure the Build Platform and Resin Tank are clear of debris.
After confirmation, you may disconnect your computer from the printer.
Pause Job:
Click 'Pause'
Resume Job:
Click 'Resume'
Cancel Job:
Click 'Cancel Job' to cancel the current printing job.
Renaming Printer:
finish renaming.
Upgrade firmware:
version firmware available. Double click the icon to start upgrading. Restart the printer when the
upgrade is finished.
Note
: DO NOT disconnect the printer and the software or turn off the UNIZ software during the
data transmission.

ADDITIONAL TOOLS

New Project:
The current project will be discarded, and a new project will be created.
Save Project:
The software save everything you made to project file that contains model data,
support structures and transformation data (translation, orientation, scaling) and you will be able
to load your model including all modification later.
Save Project as:
The software save current project to another project file.
Undo Operation:
, the system will send the current slice data to printer and start
to suspend a printing job.
to resume a paused printing job.
Double click the printer name or s/n to input a new alias and press enter to
An icon ' ' will appear next to the firmware version when there is new
Repeal one previous operation.
D UNIZ SOFTWARE
to send current slices to the selected
47