Canon PowerShot S100 Firmware Update Procedure page 3

For Windows
1. Insert the initialized SD memory card into the SD card reader/writer.
2. If you click on the Computer icon (or My Computer in Windows XP), a removable disk icon labeled
[CANON_DC] appears.
3. Drag the firmware update data, [PSS100-1.FI2] from the downloaded [pss100-v1020-win-1] folder to the
removable disk icon labeled [CANON_DC].
Please be sure to copy the firmware to the root directory of the SD memory card.
4. After copying the data, double-click the [CANON_DC] icon, and if the firmware update data,
[PSS100-1.FI2] is there, the copying process is completed.
For Mac OS
1. Insert the initialized SD memory card into the SD card reader/writer.
2. An icon labeled [CANON_DC] will appear on the computer's desktop.
3. Drag the firmware update data, [PSS100-1.FI2] and [clean.command] from the downloaded
[pss100-v1020-mac-1] folder to the removable disk icon labeled [CANON_DC] on desktop.
Please be sure to copy the firmware to the root directory of the SD memory card.
4. After copying the data, double-click the [CANON_DC] icon on the desktop. Make sure if the firmware
update files, [PSS100-1.FI2] and [clean.command], are in the folder.
5. Double-click and run [clean.command]. (If the terminal window remained open, close the window.)
Step 3. Update the camera to the new firmware
1. Insert the battery pack into the camera.
2. Insert the SD
[PSS100-1.FI2] was copied in Step. 2 into the
camera.
3. Press the [Playback] button to turn the camera on
in Playback mode.
4. Press the [MENU] button.
5. Use the Control Dial or the Up/Down/Right/Left
buttons to select the [Firm Update...], and then
press the [FUNC./SET] button.
memory card to
Caution
Caution
which
- 3 -