Cannot print images.
Check that the camera and the printer are properly connected using the USB cable.
•
Turn on the printer. For further information, refer to the operating instructions supplied with
•
the printer.
If you select [Exit] during printing, images may not print. Disconnect and connect the USB
•
cable again. If you still cannot print your images, disconnect the USB cable, turn the printer
off and then on, then connect the USB cable again.
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
Printing is canceled.
You disconnected the USB cable before the
•
disappears.
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
•
manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
•
to [Off] and print the image again (page 71).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
Disconnect the USB cable and reconnect it whenever you change the paper size after the
•
printer has been connected to the camera.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 71) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
(Do not disconnect USB cable) mark
85