The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 35).
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(
step 5 in "Read This First").
t
Light the room and shoot the subject.
•
Cannot shoot images in succession.
The "Memory Stick Duo" is full. Delete unnecessary images (
•
The battery level is low. Install charged battery pack.
•
Viewing images
Refer to "Computers" (page 82) in conjunction with the following items.
Your camera cannot play back images.
Set the mode switch to
•
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB communication (page 61).
•
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
The image does not appear on the TV screen.
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
your TV (page 52).
Check whether the connection is correct (page 75).
•
The USB cable is connected. Disconnect it according to the correct procedure (page 61).
•
The image does not appear on the screen.
If the AV cable is connected, disconnect it (page 75).
•
(Setup) menu to [On] (page 46).
(page 24).
step 6 in "Read This First").
t
81