Related Manuals for Aqara SSM-U02
Summary of Contents for Aqara SSM-U02
- Page 1 Aqara Single Switch Module T1 (No Neutral) is based on the Zigbee 3.0 wireless work with other Aqara smart devices to realize more smart scenes. * This device requires a compatible Zigbee 3.0 hub. Indicator Light Button Antenna Connect to Network...
- Page 2 Do not cover when the plug is working. Do not connect in series. Do NOT use in humid environments or outdoors. Do NOT place this product near a heat source. Do NOT place it in an enclosure losses.
- Page 3 installation! Method 1: L1 is connected to the load wire. S0 and S1 are connected to the two...
- Page 4 Diagram 1 connected to S0, and the other end is connected to the live wire. L is connected to the original switch, which is connected to the load wire, can be connected to S0 to...
- Page 5 Diagram 2 Diagram 3...
- Page 6 touch it, and replace or repair it in time.
- Page 7 4. Turn on the main power switch, and press the button on the module or on the app downloaded and the Aqara Hub installed.
- Page 8 2. Please open the app, tap “Home” and then tap “+” in the top right corner to Neutral)”, and add it according to instructions. Indicator Light Status Status Description Device power on Zigbee network is connecting Blue light keeps on...
- Page 9 Zigbee network is not connected Dimensions: 42.9 × 40 × 21.4 mm Online Customer Service: www.aqara.com/support...
- Page 10 http://www.aqara.com/DoC/...
Need help?
Do you have a question about the SSM-U02 and is the answer not in the manual?
Questions and answers