Table of Contents
Advertisement
5. Adjusting Procedure
An internal settings service menu is provided to allow adjustment of the device by qualified service personal.
Improper use of the internal settings service menu may render the device unusable. Refer to the following sections
to learn how to operate the service menu.
Starting the service mode
To start the service mode of operation and view the internal settings menu, do the following:
1. Switch on the LCD TV and make sure that the TV mode is selected.
2. Press 991 on the remote control to enter the internal Service menu.
3. Press MENU to switch the service mode pages.
4. Press
and
5. Press
and
to change the menu settings.
6. Press WIDE to save the new settings and exit.
TV/AV/S-Video WHITE BALANCE, BRIGHTNESS, CONTRAST
--WHITE BALANCE ADJUSTMENT--
1. Press 991 on the remote control to enter the internal Service menu.
2. Press MENU to switch to the PW328 Scaler Menu page
3. Press
and
to scroll to Page 2-3 options
4. Press
and
to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings.
5. Press WIDE to save the new settings and exit.
(Please don't adjust others setting in page 2-3)
--BRIGHTNESS ADJUSTMENT—
1.
Repeat the above mentioned step 1 to 2
2.
Press
and
3.
Press
and
to adjust the Brightness setting.
4.
Press
and
procedure will copy the settings of AV1 to AV2 & TV)
ATSC DTV WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
1.
Repeat the above mentioned step 1 to 2
2.
Press
and
3.
Press
and
4.
Press WIDE to save the new settings and exit.
(Please don't adjust others settings in page 2-3)
YCbCr & YpbPr of COMPONENT 1, 2 WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
Step 1: Getting COMPONENT 1 connect to 1080i signal. (The settings could not be saved if signals input from
COMPONENT 2 or connect to other sources such as 720P, 480P, 480i.....,etc.)
Step 2: WHITE BALANCE ADJUSTMENT OF Component—
1.
Repeat the above mentioned step 1 to 2
2.
Press
and
ViewSonic Corporation
All manuals and user guides at all-guides.com
(Service mode)
to scroll through the various menu options.
to scroll to PW328 FE VDC Menu Page 2-1 options
to scroll to TV/AV/S Parameter=AV1 setting and press
to scroll to PW328 Scaler Menu Page 2-3 options
to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings
to scroll to PE328 FE ADC page 2-3 options
ADJUSTMENT:
17
Confidential - Do Not Copy
to run the setting. (This
N4261w-1M
Advertisement
Table of Contents
