Detaching The Stand (For Vesa Wall Mount) - Asus PW201 Quick Start Manual

Detaching the stand (for VESA wall mount)

To detach the stand:
1. Turn the VESA cover counterclockwise to open it.
2. Remove the VESA cover from the stand.
3. Use a screwdriver to remove the four screws on the stand of the
monitor.
C A U T I O N ! C A U T I O N ! C A U T I O N ! Have the front of the monitor face down to make the
C A U T I O N ! C A U T I O N !
detachment safer and easier. We recommend that you cover the surface
with soft cloth to prevent damage to the monitor.
®
Pivot Pro Software
I n s t a l l a t i o n i n s t r u c t i o n s : I n s t a l l a t i o n i n s t r u c t i o n s : I n s t a l l a t i o n i n s t r u c t i o n s :
I n s t a l l a t i o n i n s t r u c t i o n s : I n s t a l l a t i o n i n s t r u c t i o n s :
1. Close all other applications first.
2. Make sure your graphics card manufacturer's (native)
drivers are installed before you install the Pivot
software.
3. Insert the support CD into the optical drive and run the
START_PIVOT program.
After the installation, you can set up hotkeys for different rotation degrees
by pressing the right mouse button -- enter Properties -- Settings --
Advanced -- Pivot Software -- Hotkeys.
• This software only supports Windows
•
6 6 6 6 6
XP operating systems.
For more information or help, go to www.portrait.com.
Q u i c k S t a r t G u i d e Q u i c k S t a r t G u i d e Q u i c k S t a r t G u i d e Q u i c k S t a r t G u i d e Q u i c k S t a r t G u i d e
® Pro
® 98SE, ME, NT 4.0, 2000, and