Error Messages - Yamaha n8 Update Manual

Error messages

・
If the same error message appears each time you try to update, the device may need repairing, in
which case you should contact your Yamaha dealer.
Can not get FW/mLAN interface!!
FW device not found!!
Can not open FW device!!
Can not get FW port information!!
FW port not found!!
Can not open FW port!!
Can not get FW device information!!
File format error!!
FW communication error!!
No driver is installed. Make sure to install the Yamaha
Steinberg FW Driver correctly.
The computer cannot recognize the n8/n12 because the
n8/n12 is not connected or the n8/n12 is powered off.
Make sure to connect the n8/n12 to the computer via
FireWire cable, and also make sure that the n8/n12 is
turned power on in update mode.
Illegal data was selected.
The update program cannot completely send the data to
n8/n12 due to a problem in the update process, such as
disconnection of the FireWire cable, etc.
Quit the nUpdate, update again by repeating the
procedure from Step 1 in the "Update Procedure" section
above.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
6
©2008 Yamaha Corporation