Advertisement
Call 01255 555200
Email info@durite.co.uk
Visit www.durite.co.uk
O-649-70 12/24VDC Jump Starter Pack
DURITE's innovative 12/24v Super Capacitor Jump pack. Super light and compact with capability to jump start all petrol
vehicles and diesel vehicles with upto 16.0L engine capacity. For both 12v and 24v application this product outputs 500A
Starting Current and 1200A Peak Current. Intelligent LCD display shows state of charge and vehicle battery health status. CE
approved.
Parts List:
1 x 12/24v Super Capacitor Jump Pack
1 x 230v UK Charger
1 x 12v In car charger
1 x User Manual
THE TRUSTED QUALITY BRAND FOR PROFESSIONALS
Advertisement
Table of Contents
Related Manuals for Durite O-649-70
Summary of Contents for Durite O-649-70
- Page 1 O-649-70 12/24VDC Jump Starter Pack DURITE’s innovative 12/24v Super Capacitor Jump pack. Super light and compact with capability to jump start all petrol vehicles and diesel vehicles with upto 16.0L engine capacity. For both 12v and 24v application this product outputs 500A Starting Current and 1200A Peak Current.
- Page 2 WARNINGS! Before using this unit please read these in- structions carefully Take special care to follow the warnings and safety suggestions listed throughout this manual. Keep these instructions for future reference.
- Page 3 1. Check before using the product that there is at least 60% charge state. If there is not do not attempt to start the vehicle until the unit is fully charged. 2. Do NOT crank the engine for more than 3 seconds using the product. 3.
- Page 4 PRODUCT LAYOUT CHARGING 1. Connect the USB cable with the UK plug or 12V cigarette charger and then plug it into the 5V3A socket shown above. Follow instructions per state of charge on the LCD screen. Remove from charge once fully charged. Use appliance immediately to benefit from full cranking ability from the full charge stored in the capacitors.
- Page 5 OPERATION GUIDE Check the power status of the jump starter by pressing the power SWITCH (shown page be- fore) Assess the vehicle voltage by connecting the RED to +VE terminal and BLACK clamp to -VE terminal. The unit should auto select the correct voltage. When the starter can not recognize the correct voltage, you must manually press the corre- sponding voltage button.
- Page 6 Vehicle Battery Test Function: First, connect the RED clamp to the vehicle's battery positive(+) terminal and connect the BLACK clamp to the vehicle’s battery negative(-) terminal. Then the jump pack will determine whether the vehicle battery needs to be charged or replaced by detecting voltage and resist- ance.
- Page 7 TECHNICAL SPECIFICATIONS Call 01255 555200 Email info@durite.co.uk Visit www.durite.co.uk TECHNICAL SPECIFICATIONS Type Jump Starter Pack Capacity 720F x 10 Super Capacitor Battery Cell Output Voltage 12/24VDC Start Current.. 500A Peak Current. 1200A Charge lnput.. 5V3A (or 5V2A / 5V1A) Full ChargingTime 1.5 Hours (5V3A), 3 Minutes Vehicle Battery...
Need help?
Do you have a question about the O-649-70 and is the answer not in the manual?
Questions and answers